Specifications

S eries 3500 - MultiP age S ys tem
6
With the MultiPage Transmitter, you can
send numbers to UHF Displays , page Vibrat-
ing Pagers , and control the Informant (signal
light). A MultiPage system is defined as one
MultiPage Transmitter and any combination of
these receiver types.
1. 1 MU L T IP A G E TR A N S MIT TE R
The MultiPage Transmitter is a unique Trans-
mitter that facilitates the use of UHF Displays ,
Pagers and Informants . Based on the superb
hardware platform of the Scope DataPage Lite,
the MultiPage is a software upgrade designed
as the ultimate paging solution.
1. 2 W IR E L E S S U H F D IS P L A Y S
The new 3500 Series Wireless UHF Displays
have been specifically designed to receive signals
from the MultiPage Transmitter. These Dis-
plays come in 2-, 3-, 4- and 6-digit models with
5.5-inch numbers. They contain the same high
quality construction and components expected
from SenSource's products and Displays.
Numbers sent to the UHF Display will be
saved and displayed on both the MultiPage and
the UHF Display until deleted. These numbers
can be deleted manually or programmed by the
user to automatically delete, depending on the
user's preference.
1. 3 TH E IN F O R MA N T
The Informant can be set to respond to any
“Pager address." Using the message portion of a
page, the user can control which lights, or
combination of lights are on.
The Informant has been designed specifically
for use by children’s ministries in churches. The
Informant receives its control signals directly
from the MultiPage, DataPage Lite, or DataPage
II Transmitter. The Informant is used to alert
children's ministry workers when the service is
ending. A green light indicates the service is in
progress; a yellow light indicates the service is
beginning to close; a red light indicates the
service has closed; and a blinking red light
indicates the service has been dismissed.
1 MULTIP AG E S Y S T E M OVE R VIE W
1.4 P A G ING V IB R A T ING P A G E R S
The MultiPage can be used to send messages
to Pagers or to trigger the internal “beep
type”messages of Pocket Pagers. In addition, the
MultiPage Transmitter can re-page Pagers at
user-defined intervals. The list of Pagers to be re-
paged is displayed on the MultiPage Transmitter
screen.