Specifications

S eries 3500 - MultiP age S ys tem
17
5 V IB R AT ING PAG E R S
5.1 T UR NING ON T HE P A GE R
Hold down the LARGE GRAY BUTTON un-
til the Pager comes on.
5.2 S E NDING A P AG E
Please see the diagram in the MultiPage
section of this manual for detailed instructions
on sending pages.
5. 3 A C T IV A T ING A N A L P H A
ME S S AG E
To activate a pre-defined message to a Vibrat-
ing Pager, type in the Pager number followed by
the "SEND" key. You will be prompted for a
“BEEP TYPE (1-4).” Select 1-3 here and press
the “SEND” key. This will display on the Pager
one of the three pre-programmed text messages
stored in the Pager. If no number is chosen, the
Pager will default to Beep Type 4 (“PAGING”).
5. 4 S E NDING A NUME R IC ME S S A G E
To send a numeric message to a Pager,
simply type in the Pager number followed by the
“SEND” key. The Transmitter screen will dis-
play “BEEP TYPE.” Simply press “ENTER” to
bypass this. The Transmitter screen will then
display “ENTER MESSAGE.” Using the number
keys, type in a numeric message up to 16 digits
followed by the “SEND” key. Note: If the mes-
sage portion of a page is not blank the “BEEP
TYPE” alpha message selected will be ignored.
5.5 R E C E IV ING A P A G E
The Pocket Pager will start to vibrate when
it is paged. No action is necessary on the receiv-
ing end. The Pager will stop vibrating after
approximately eight seconds. If the user would
like to stop the vibration before the eight seconds,
simply press the LARGE GRAY BUTTON. If a
numeric message is sent to the Pager, the mes-
sage will be visible on the Pager's LCD screen
until the Pager stops vibrating. To view the
message after the Pager has stopped vibrating,
press the LARGE GRAY BUTTON once.
5.6 S E NDING A G R OUP C AL L P AG E
All Pagers respond to call number “900”
(unless another group call number has been
chosen by the customer and programmed at the
factory). To page all Pagers at once, simply enter
“900” and "SEND." Then press "SEND" again at
the beep type prompt.
5. 7 MA NU A L P A G E R T U R N-O F F
Press the DOWN ARROW BUTTON four
times. The words “PGR OFF” will appear on the
LCD screen. Press the LARGE GRAY BUTTON
once to confirm. NOTE: If you have chosen to
order the Pagers with the on/off button dis-
abled, then Pagers can only be turned off from
the Transmitter.
5.8 P A G E R T U R N-O F F F R O M B A S E
Enter the pager number followed by the
“SEND” key.
Press “ENTER” to bypass “BEEP TYPE”
screen. When screen reads “ENTER MES-
SAGE,” enter the message code “(0091)(0)” fol-
lowed by “SEND.” NOTE: In order for the code to
work, the parentheses must be entered.
Since all Pagers respond to call number
“900,” paging “900” with the message code
“(0091)(0)” will turn all Pagers off.
5. 9 P O W E R C H E C K ING
When the battery level is low, a low-battery
symbol will appear at the bottom of the Pager
screen.
5. 1 0 L IG H TIN G F U N C TIO N
Pressing the UP ARROW BUTTON for two
seconds will turn on the backlight on the LCD
screen. The light will shut off automatically after
approximately 10 seconds, or the user may turn
the light off manually by pressing the UP AR-
ROW BUTTON once.
5. 1 1 C A U TI O N
a) The Pager is made up of LCD and
precision elements. Avoid water and
high temperature.
b) Remove the battery if the Pager will not
be in use for a long period of time.
c) If the Pager is not working properly, do
not dismantle or repair it yourself. Call
SenSource for technical service.