Specifications

S eries 3500 - MultiP age S ys tem
10
Option 2
Auto Delete T ime
The Auto Delete Time is the time that a
number remains on the Display before it is
automatically deleted.This time can be set using
the “(“ and “)” keys to select the desired value
from 1 to 25 minutes. Once the desired value is
reached, press “ENTER” to return to the main
systems options menu.
NOTE: The Wireless UHF Display has
an independent Auto Delete Time which is
set following the instructions in the UHF
Display Section.
The factory default for the UHF Display
delete time is 45 minutes. The reason for having
an auto delete time in the Display, as well as the
MultiPage Transmitter, is best understood by
the following example: At the end of the day, a
user may unplug the Transmitter to turn it off.
If there were numbers being shown on the
Display before the power was unplugged from the
Transmitter, the numbers would remain on the
UHF Display until the Display's auto delete
removed them.
Option 3
R e-P age Time for V ibrating P agers
This is the time between re-pages for Vibrat-
ing Pagers. For example, if the re-page time is
set to one minute, then the Vibrating Pagers will
be re-paged every minute. Using the “( “ and “)”
keys you can choose between 0 and 25 minutes
for the re-page time. A re-page time of 0 disables
re-paging. When the desired value is selected,
press “ENTER” to return to the main options
menu.
Option 4
S et Dis play ID Addres s
The options area is used to tell the MultiPage
Transmitter the address of the UHF Display.
The factory default is 1500. If you change this
address, you will also have to set up the UHF
Display to respond to your new address. (See
Display Options.)
Option 5
B as e ID
The Base ID is the digital identification in
which all components of a system run. The
factory default for this number is 0500000. This
number may be changed to avoid “cross talk”
with other nearby systems. If you change this ID
number, then the UHF Display , Informant
and Vibrating Pager settings will have to be
changed accordingly. It is recommended that
users do not change this setting.
NOTE: Pager Base ID can only be
changed at the factory.
Option 6
B aud R ate
This is the rate at which the digital commu-
nications takes place in your system. It is
recommended that users do not change this
setting. If you change this number, the Dis-
play , Informant , and Vibrating Pager set-
tings will have to be changed accordingly.
NOTE: Pager Baud Rate can only be
changed at the factory.
Option 7
Out-of-R ange
This feature is available only with coaster
systems. When the out-of-range option is acti-
vated, the transmitter will periodically send a
page telling everyone that they still are in range.
If a coaster also has its out-of-range feature
activated, it will sound an alert within 1 minute
of leaving the transmitter’s coverage area.
Option 8
B ehavior
The behavior option exists to accommodate
those users who are more familiar with the
DataPage Lite standard interface and do not
need the display or re-paging capabilities of the
MultiPage. The behavior setting can be toggled
between “MultiPage” and “DataPage Lite." In
DataPage Lite mode, the re-page feature is dis-
abled and the Transmitter will simply wait for a
Pager number and then page a Pager. The
screen and button behavior will revert to the
DataPage Lite operation.
Option 9
Informant ID
The option area is used to tell the MultiPage
Transmitter the address of the Informant. The
factory default is 0400. If you change this ad-
dress, you will also have to set up the Informant
to respond to your new address. (See Informant
Options.) The MultiPage will treat this address
uniquely in that it will not ask for a beep type and
it will not re-page.