User`s guide

2-8
Messages
BUTIL
Maintenance
Utility
Messages
The following messages are specific to the Maintenance utility.
BUTIL-1: Message file initialization failed
Only BUTIL.EXE in DOS returns this message. The utility could not
find the BUTILDOS.MSG file, which contains messages that the
utility uses.
BUTIL-2: Message file initialization failed. BUTIL was
unable to access BTIUTILD.MSG
Only BUTIL.EXE in DOS returns this message. The utility could not
find the BTIUTILD.MSG file, which contains messages that the
utility uses. Ensure that you installed the Transactional engine for
DOS correctly.
BUTIL-6: The BUTIL command is invalid
The syntax of the command you entered is incorrect. Verify the
syntax before re-entering the command.
BUTIL-8: The command completed, but one or more
errors occurred
An error occurred when you executed a command that performed a
number of MicroKernel operations. These commands include
COPY, LOAD, or CLONE. This message is accompanied by
additional messages that can help you identify the problem.
BUTIL-9: The command did not complete due to an
unrecoverable error
Verify that the syntax you entered is correct before re-entering the
command. This message is accompanied by additional messages that
can help you identify the problem.
BUTIL-10: The command line contains a syntax error
The syntax of the command you entered is incorrect. Verify the
syntax before re-entering the command.