User`s guide

1-136
Status Codes
5000 to 5999
Encryption
Status Codes
This section lists status codes you can receive when using the Wire
Encryption feature. In Advanced Operations Guide, see Pervasive
PSQL Security for more information about the Wire Encryption
feature and other Pervasive PSQL security topics.
5000: Client requires encryption
Your client configuration setting for Wire Encryption is set to
Always, and the server to which you are trying to connect either has
a Wire Encryption setting of Never, or the server has a version of less
than 8.50 which does not support the Wire Encryption feature.
To resolve this condition, either change the Wire Encryption setting
of the client to If Needed or change the Wire Encryption setting of
the server to Always or If Needed.
To change the Wire Encryption setting:
 Use Pervasive PSQL Control Center (see To access configuration
settings in PCC for a local client in Advanced Operations Guide).
 You can also use the bcfg command-line utility (see
Configuration Through CLI Utility in Advanced Operations
Guide).
Note On any one machine, the Pervasive PSQL server and client
share a single Wire Encryption setting.
5001: Server requires encryption
Your client configuration setting for Wire Encryption is set to Never,
and the server to which you are trying to connect has a Wire
Encryption setting of Always.
To resolve this condition, change the Wire Encryption setting of the
client to If Needed or Always.
To change the Wire Encryption setting:
 Use Pervasive PSQL Control Center (see To access configuration
settings in PCC for a local client in Advanced Operations Guide).