User`s guide
1-93
1 to 199
These three values must have a 1:2:10 ratio. You can increase
these values to at most three times the default. If you
continue to receive this status code after increasing these
values, the problem is most likely not related to these
settings.
For Windows servers, verify that the Maximum Packet Size
registry setting is 576 decimal or 240h. The path to the
MaxPktSize registry setting is
HKEY_LOCAL_MACHINE\System\currentControlSet\
Services\NwInkIPX\NetConfig\MaxPktSize.
If you continue to receive this status code after increasing the
network timeout parameters, this status code usually indicates a
problem with network communications. Verify that you have up
to date network cards and drivers; for example, incompatible
LAN card drivers can also cause this status code to occur.
Consult your LAN administrator for network communication
troubleshooting.
1 Choose StartRun.
2 Type Regedit and click OK. The Registry Editor opens.
3 Make the following CHANGES to the server’s registry using
Regedit:
HKEY_Local_Machine
SystemCurrentControlSetService
s
NwLnkIpx<Network Card>MaxPktSize = 240 Hex.
HKEY_Local_Machine
SystemCurrentControlSet |
Services
NwLnkIpx<Network Card>NetworkNumber =
<Non-Zero Value>
4 ADD the following registry entry:
HKEY_Local_Machine
SystemCurrentControlSet |
Services
LanManServerParametersMinClientBufferSize
regdword = 500 decimal.
96: A communications environment error occurred
The MicroKernel returns this status code for the following reasons:
You tried to attach to the MicroKernel on a server, but the SPX
connection table or the MicroKernel client table is full. To avoid
receiving this error, add more memory. Both of these resources
are managed dynamically up to available memory.