User's Manual

Page 23 of 35
MTI Proprietary
z Clear All: Click this button to delete all channels.
 Add New Channel
z Channel Bandwidth: Currently, channel bandwidth only supports 5MHz and 10MHz.
z Frequency: For 3.5 GHz CPE, it Supports frequency range from 3650000 KHz to 3675000
KHz. The unit for this field is “KHz
”. For example, if desired frequency is 3.65GHz, then enter
“3650000” in this field.
z Duration: Duration supports 5msec.
z Add: Click this button for adding new channel for the configuration.
After adding new channels, it is necessary to establish connection between CPE
and BS to make new channel work. Please refer to stop/start on chapter 3.8
Subscriber Station for detail information.
 Delete Channel
z Channel ID: Channel ID could be found at FA field in Scan List Table.
z Delete: Click this button to delete channel.