User's Manual

Page 22 of 35
MTI Proprietary
3.6 Channel Setting
To setup WiMAX Channel setup, please click “Channel Setting” at CPE web page, as Figure 13. Here, it
takes 2.5GHz for example.
Figure 13 Channel Setting
Before channel modification (add or delete channels), to stop connection between CPE and
BS is necessary. Please refer to stop/start
on Chapter 3.8 Subscriber Station for further
information.
 Channel List
z Channel Scanner: All setting channel information will be display here, including bandwidth
(KHz), Frequency (KHz), and frame duration (ms)