User Manual

Page 23 of 32
MTI Proprietary
3.7 EAP Setting
By clicking “EAP Setting” at left menu, setup Extensible Authentication Protocol (EAP), shown as Figure
14.
Figure 14 EAP Setting
u PKM (Privacy and Key Management): Select “v2 (EAP)” to enable PKM, or select “None” to
disable PKM. Once PKM is disabled, then all the following items will be disabled too.
u EAP Method: Supports TTLS
u Outer Identity: Enter outer identity. Max length for Identity is 200 characters and for Realm is 48
charcters.