User Manual

Page 22 of 32
MTI Proprietary
l Clear All: Click this button to delete all channels.
u Add New Channel
l Channel Bandwidth: Currently, channel bandwidth only supports 5MHz and 10MHz.
l Frequency: Supporting frequency range is from 2500000 KHz to 2690000 KHz, the unit for
this field is “KHz”. For example, if desired frequency is 2.5GHz, then enter “2500000” in this
field.
l Duration: Duration supports 5msec.
l Add: Click this button for adding new channel for your configuration.
After you add new channels, you have to establish connection between CPE and
BS to make new channel work. Please refer to stop/start on chapter 3.8 Subscriber
Station for detail information.
u Delete Channel
l Channel ID: Channel ID could be found at FA field in Scan List Table.
l Delete: Click this button to delete channel.