User Manual

Page 20 of 32
MTI Proprietary
u Clone:
l When CPE finds that the link status of Ethernet port is down and up, it will start scanning.
l CPE scans Ethernet port. Once CPE detects the source MAC address of Ethernet header is
not equal to the current WiMAX 16e MAC address, it will capture this MAC address to replace
current one.
l If the captured MAC address is not equal to current one, CPE is going to reboot. After reboot,
it will use the captured MAC address instead of current WiMAX 16e MAC address.
l See Figure 12 for detail information
Figure 12 MAC Address Clone