User Manual

A8 Configuration Manual - fm_1.2.6.3_v4.1.FCC.doc ASTRI Confidential & Restricted Access
Page 27 of 36

7 S OFTWARE U PGRADE BY W EB -A DMIN
7.1 F IRMWARE U PDATE
The user can upgrade the firmware by selecting Firmware Update in the tool bar.
In the Firmware Update (BASIC) menu, click the icon Update Firmware if the FTP server
setting has been defined before, as shown in Figure 27.
Figure 27. Firmware Update (Basic) – Web-admin
Update the FTP server setting by clicking the Advanced icon and perform the following:
1. Update the FTP information, as shown in Figure 28.
- Host Name : IP address of the FTP server, where the new firmware is stored
- User Name : The FTP user name
- Password : The password of the FTP user
- Image Path : The location of the file in the FTP server
- Image Name : The new firmware file. It must be B4.img.
2. Select Update Firmware at the bottom to start uploading the new firmware from the
FTP server.
3. If the firmware upgrade is successful, a window will appear as Figure 29. Click the iocn
REBOOT AP to reboot the A8.
4. Check the firmware version by selecting About in the menu bar, as discussed in Section
5.2.