User's Manual

MTI RFID ME User Manual
- 24 - Jul 9, 2014
5.1. Tag Setting Function
5.1.1. Set EPC
Click “Set EPC” button then enter setting window to modify or change a tag’s EPC. The EPC,
EPC length and access password can be set in this window.
Note: The default setting for the “Current Access Password” is 00-00-00-00. For any other
“Current Access Password” settings other then 00-00-00-00, please refer to Class 1 Generation 2
UHF Air Interface Protocol Standard “Gen 2” at http://www.epcglobalinc.org/standards/uhfc1g2.
Figure 20
 EPC Write Successful
MTI RFID ME will alert a confirmation message to show the EPC information is set
successfully.
Figure 21