User's Manual

MTI RFID ME User Manual
- 20 - Dec 30, 2011
5.1. Tag Setting Function
5.1.1. Set EPC：
To modify or change a tag’s EPC, select “New EPC” modify with a value of the new desired EPC
value, then press “OK” to rewrite the EPC as shown in Figure 20.
Note: The default setting for the “Current Access Password” is 00-00-00-00. For any other
“Current Access Password” settings other then 00-00-00-00, please reference the Class 1
Generation 2 UHF Air Interface Protocol Standard “Gen 2” at
http://www.epcglobalinc.org/standards/uhfc1g2.
Figure 20
 EPC Tag Write Successful Message：
When the tag is re-written successfully, you will see a confirmation message
response “Set EPC to New Tag value “as shown in Figure 21.
Figure 21