User Manual

MTI RFID Reader Operation Manual PAGE: 14
43-RFID0900-E1-MANUAL
DATE: 18-04-2006
台揚科技股份有限公司
MICROELECTRONICS TECHNOLOGY INC.
ISO 9001 Certified
3.5 Setup Password Setup
To set up password of RU-813 for Ethernet communication, perform the following
steps:
1. Verify all cables and power supplies are secure and power up the readers.
2. Set the subnet mask of host computer to the same subnet domain of reader.
3. Open Web browser on your host computer.
4. Type IP address at web address on the browser.
5. Enter password, then click “Login”.
6. Chang setup password
7. Click “Update”
Note: Once the Setup password is changed, the new password will be
required for next login process.
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。