User Manual

MTI RFID Reader Operation Manual PAGE: 11
43-RFID0900-E1-MANUAL
DATE: 18-04-2006
台揚科技股份有限公司
MICROELECTRONICS TECHNOLOGY INC.
ISO 9001 Certified
1. Refer to Figure 4, and mark the location of the mounting screws.
2. Drill the appropriate size hole for screws.
3. Install the washers and insert the screws.
4. Tighten the screws to within .375” of the surface.
5. Install the reader and finish tightening the screws.
2.2.4 Drywall Mounting
To temporarily mount the RU-813 to drywall or sheetrock, MTI
recommends either #10 toggle bolts or #10 drywall anchors.
2.3 Ethernet LAN Installation
The RU-813 can be networked with other readers on an enterprise 10/100 BaseT
Ethernet LAN with crossover Ethernet cable. The IP address can then be accessed
by your network server or host computer, please refer to chapter 3 for further
information.
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
Ethernet Port
Power Port
Figure 5 Installation