User's Manual

802.11a Bridge BR5811E1 MTI Proprietary Page 22
 Configure the following setting for the Ethernet connection in the Internet Protocol
(TCP/IP) Properties dialog box.
•
User IP Address
• LAN Mask Setting
•
Gateway Setting
• DNS Server Setting
Internet protocol (TCP/IP) Properties dialog box
 Click OK to continue and close the Internet Protocol Properties dialog
Notices
If you use the same HPC to ping/connect the same IP bridges, you must clear
the route table in the HPC first. Otherwise, you won’t find other bridge. In
Microsoft Windows system, you can do it by enter following command in DOS
command mode: (assume the ARP program is under the path of
c:\windows\system32)
C:\windows\system32>ARP -D