User's Manual

802.11a Bridge BR5811b MTI Proprietary Page 16
2-7 Installing the ODU
The MTI BR5811b can be mount on a 2” Steel or Stainless Steel Tube. You can reference the
Figure.
ODU Configuration
You can refer the photo here for installation.
2-8 Connecting the cable
An Ethernet cable connects the ODU to the POE output port. The cable connects power to the ODU
and allows Ethernet data to flow between Stations with Bridge system. Another Ethernet cable
connects the station to POE input port. AC power is applied to the bridge system by connect it to POE
AC adapter.