User's Manual

802.11a Bridge AP5822 MTI Proprietary Page 19
3-2 Network Configuration
Follow these steps to configure the HPC for Bridge network control:
n From the HPC’s Start menu, choose Settings and open the Network and Dial-up
Connections dialog box.
n Right-click on the Local Area Connection icon that belongs to the Ethernet controller
connected to the Bridge, and select Properties.
n Within the Local Area Connection Properties dialog box, choose Internet Protocol
(TCP/IP) and click Properties.
Local Area connection properties window
n Configure the following setting for the Ethernet connection in the Internet Protocol
(TCP/IP) Properties dialog box.
• User IP Address (Don’t use the same IP address as your bridge)
•
LAN Mask Setting
• Gateway Setting
• DNS Server Setting