Data Sheet

Fast up to 60Hz sample rates
Accurate to 3%
Low Power <3uA stdby in SingleStep mode
Long Range up to 2m
Eye Safe Laser 940nm Class 1
Small Size 21 x 25 x 8.3mm
Autonomous Mode runs at low power without an Arduino!
Features
• Advanced Technology:
Eye safe
VCSEL Class 1 Laser
•
Ultra Fast
: up to 60Hz sample rates and up to approx 930Hz I2C reading rates even with an Arduino UNO.
• Accurate: to +/-3% with mm precision. Every unit is pre-calibrated by us before shipping.
• Ultra Low Power: <3uA typ Quiescent Current in Single Step Ultra Low Power Mode at 2.8v supply.
• Long Range: up to 2 meters.
• Small Size: 21 x 25 x 8.3 mm.
• Light Weight: 2.5 g.
• Easy to Use: control with I2C commands (no sensor library required)
• Easy to Parallel using I2C bus
• RoHS compliant, Lead-Free assembly
• Integrated level shifter for native 3v to 5v operation
• Remotely re-configurable I2C board address and operation modes
• On board non-volatile storage for I2C address, calibration and settings
• Several connector options including GROVE, SMD or standard 0.1 inch (2.54mm) header pins
• Blue activity LED to show measurement activity
• Hardware WatchDog Timer to automatically reboot tinyLiDAR if no I2C bus activity is seen in approx 3 seconds.
tinyLiDAR Reference Manual rev1.26 5