Data Sheet

Revision History
Date Author Firmware GUI Term Ref Manual Comments
10/2017 DB 1.3.7 1.0 1.0  initial relelase
12/2017 DB 1.3.8 1.1 1.21
 added Autonomous feature

added Ultra Low Power (ULP) mode
1/2018 BM 1.3.9 1.23 1.22
 added Ultrasonic Emulation mode
 added support for Arduino Leonardo to
GUI Terminal Sketch
1/2018 BM 1.3.9 1.24 1.24

added support for Arduino Mega to GUI
Terminal Sketch
2/2018 BM 1.4.0 1.25 1.25
 added Real Time Mode, changed SS to
ULP as default
 added features for Auto Mode
 added mem clear via hardware pin
3/2018 BM 1.4.1 1.26 1.26

added Autonomous IoT mode
 updated the Autonomous mode LED
blinking patterns
Resources
The latest documents and sample code maybe downloaded from our official repository at
https://microedco.s3.amazonaws.com/index.html
tinyLiDAR’s webpage is at https://microed.co/tinylidar/
Trademarks
tinyLiDAR is a trademark of MicroElectronicDesign, Inc.
FlightSense is a trademark of STMicroelectronics
All other trademarks are the property of their respective owners.
Electrostatic Discharge Caution
This sensor board can be damaged by ESD. MicroElectronicDesign recommends that in
general all electronic boards and parts be handled with appropriate precautions. Failure to
observe proper handling and installation procedures can cause damage. ESD damage can
range from subtle performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because very small parametric
changes could cause the device not to meet its published specifications.
Important Information and Disclaimer
The information provided in this document represents MicroElectronicDesign's knowledge and belief as of
the date that it is provided. MicroElectronicDesign bases its knowledge and belief on information provided by
third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are
underway to better integrate information from third parties. MicroElectronicDesign has taken and continues
to take reasonable steps to provide representative and accurate information but may not have conducted
destructive testing or chemical analysis on incoming materials and chemicals. In no event shall
MicroElectronicDesign's liability arising out of such information exceed the total purchase price of the
MicroElectronicDesign product(s) at issue in this document sold by MicroElectronicDesign to the Customer.
tinyLiDAR Reference Manual rev1.26 38