Data Sheet

MC Continuous mode 0x4d 0x43
Set tinyLiDAR to continuous conversion mode. This is the lowest latency and
highest power mode of the module. Note that this command will cause
tinyLiDAR
to write this mode to non-volatile memory and reboot. Therefore
please allow some time for it to reboot.
Host -> Sensor
Send Command
0x4d {M}, 0x43 {C}
Example:
Set tinyLiDAR
to continuous mode at default address of 0x10.
<10:w> 4d 43
tinyLiDAR Reference Manual rev1.26 15