Data Sheet

F LED Enable
0x46
This will make the LED blink for each measurement taken.
Host -> Sensor
Send Command
0x46 {F}
Example:
Enable the LED indicator on tinyLiDAR at default address of 0x10.
<10:w> 46
G LED On
0x47
This will turn on the LED and keep it on regardless of measurements.
Host -> Sensor
Send Command
0x47 {G}
Example:
Set the LED to be on.
<10:w> 47
X Reboot only
0x58
Reboot tinyLiDAR immediately without writing any settings to non-volatile
storage. Please allow some time for it to reboot.
Host -> Sensor
Send Command
0x58 {X}
Example:
Reboot now.
<10:w> 58
tinyLiDAR Reference Manual rev1.26 13