Specifications

87
The batteries are exhausted.
Replace the batteries.
The remote
control does not
work.
The remote control is not directed properly.
Aim the remote control towards the front side
of the receiver and ensure that there is no
obstacle between the remote control and the
receiver.
Channel has
received new
frequency and is
not transmitted
anymore with the
current data
Delete the corresponding channel and carry
out an automatic scan.
Exit favourites list Press the FAV key and the 1 key.
password The default password is 0000.
Cannot remember
personal
password
Please contact the service hotline if you have
forgotten your personal password.
Operating manual
in additional
languages
On our website this operating manual is
available for download in additional languages.
channel-list editor On our website a channel-list editor is available
for download.
Default value the default settings are restored if you keep the
standby key at the front side of your receiver
pressed for more than 10 seconds. Caution! By
doing this, your personal settings will get lost.