Specifications

61
o LNB power: Enabling and disabling LNB power. ON
is preset. If you have your receiver connected to an
antenna or 1-cable system without current supply,
you must disconnect the current supply for the LNB.
o Audio signal: Switching on and off the integrated
acoustic satellite finder signal.
o Auto Off: Disabled, 60/120/180 minutes

With the Auto Off, you can set after how many
minutes the receiver will automatically switch to
standby mode if it receives no command within
the set maturity. You have a choice between 60,
120 and 180 minutes. 2 minutes before the end
of the set remaining time is displayed a message
just to inform you. Would you like to have the
receiver will not go into standby mode, you may
send a command via the remote control. The
adjusted remaining life starts all over again. To
disable this feature, choose "not active".
This is a feature that protects the environment.