Specifications

52
o Network scan: Intelligent scan. Only available if
"Default setting for scans" has been selected in the
next menu item.
o Scan mode:
Option "Automatic scan“: The complete satellite will
be scanned. No data required. Option "Default
setting for scans“: Only transponders already
created will be scanned.
o Scan: The scan will be started by pressing the OK
key. The found channels are added at the end of the
general satellite list.
• Multi-satellite scan
Here, you can scan all satellites enabled in the submenu
item "Satellite list" at once. The setting of the scan filters
is described in the previous submenu item.