Specifications

38
Caution!
For using vehicles with 24 volt on-board voltage (eg.
Trucks), you have to use a 24V / 12V DC / DC
converter. If not, the receiver can suffer damages. Your
warranty will be lost, if ignored.
The receiver is supplied with preset TV channels and can
be used directly. If you want to check if new channels are
available, initiate a scan for broadcasting stations. Read
the information further below for this purpose.

To get into standby mode, press the red key at
top left of the remote control. The red LED is lit.
The device consumes approx. 1W only.
Currently, this is a very low value of power
consumption.