Specifications

28
Connection of the infrared receiver
The reception of the remote control signals can be effected with an
external infrared receiver. Thus it does not need a clear view
between the remote control and the receiver. That gives you the
possibility to place the receiver e.g. in an cupboard. Just plug the
infrared device into the “IR-IN” connector and place it somewhere,
where it can receive the signals of the remote control without barrier.
⇒ Plug the connector of the infrared device into the “IR-IN” port
of the receiver
⇒ Lay the cable of the infrared receiver carefully and fix the
infrared device with the double-faced adhesive tape, including
in the scope of supply, on an appropriate place
Caution!
Adhesive bonding can change the color of the place,
where the adhesive foil is fixed.

The infrared receiver includes LEDs, which show
you the state of the receiver. If the green LED is
glowing, the receiver is in operating mode. The
red LED glows in standby mode. (optional)