User Guide

12/29/2017 Open Source WiFi Weather Station System - Microduino Wiki
http://wiki.microduinoinc.com/Open_Source_WiFi_Weather_Station_System 7/10
Program Download
Weather Station Code: ESP8266BlynkWeatherStation (https://github.com/Microduino/ESP8266BlynkWeatherStation)
Programming
Stack Microduino-Core+ and Microduino-USBTTL together.
Connect Microduino-USBTTL for program uploading with a USB cable.
Attention: Please upload programs before stacking all modules together.
Open Arduino IDE for Microduino development environment. (Please refer to: AVR Core Getting started)
Click Tool , make sure the right board card(Microduino-Core+) and processor(Atmega644pa@16M,5V), select the corresponding port
(COMX) .
Click File -> Open , scan to the program address, click "ESP8266BlynkWeatherStation.ino" and open it.
After that, please click the button "→" to upload programs to the development board.
Hardware Buildup
Step1
Fixate Microduino-OLED and Structure-A1 with screws.
Step2
Assemble Structure-B1~B5 with Structure-B6.