User guide

19
Getting Started
Downloading the Virtual Device-Mi Application Using ZDownloader
01/26/2015 Virtual Device-Mi User Guide P1076806-001
7. Click OK to add the printer.
Adding a Parallel Printer
If you will not be adding a parallel printer, skip to step 11 to install a network printer.
8. Select the Parallel Communication Type.
The available parallel ports will be shown in the Port drop-down box.
9. Select the port to which the printer is connected. No additional configuration is necessary.
10. Click OK to add the printer.
Adding a Network Printer
11. Select the Network Communication Type.
12. Click Port Settings.
The following window appears.
13. Enter the printer’s IP address.