User guide

Getting Started
Downloading the Virtual Device-Mi Application Using ZDownloader
18
P1076806-001 Virtual Device-Mi User Guide 01/26/2015
Adding an RS-232 Printer
If you will not be adding a serial printer, skip to step 8 to install a parallel printer or step 11 to
install a network printer.
3. Select the serial port to which the printer is connected.
4. Click Port Settings.
The following window appears.
5. Adjust the settings as necessary. The printer’s serial port settings must match the
computer’s serial port settings. For more information about the settings, refer to the User
Guide for your printer.
6. Click OK to save the port settings.