User guide

Introduction

Virtual Device-Mi Features

P1076806-001 Virtual Device-Mi User Guide 01/26/2015

Virtual Device-Mi Features

The Virtual Device-Mi application:

• Uses existing features of Zebra printers, when available.

• Offers fonts similar to the original device. These fonts will use 120 KB or more of

memory space.

• Supports the Bluetooth

, RS-232, Ethernet, WLAN, and USB interfaces.

• Offers many outline fonts, barcodes, and specific commands and features of target printer

models (see

Supported Fonts on page 43).

• Provides support of Microcom Label Design Software (LDS) commands (see Commands

on page 37).

Configuring Network Connectivity

Your printer may be equipped with one or more of the following interfaces:

• Bluetooth—For detailed information to connect a Bluetooth device, refer to the Bluetooth

User Guide.

• Wired print server—For detailed information, refer to the ZebraNet Wired and Wireless

Print Servers User Guide.

• Wireless print server (a/b/g/n)—For detailed information, refer to the ZebraNet Wired and

Wireless Print Servers User Guide.

For other connectivity options, refer to the User Guide for your printer. Copies of these

manuals are available at

http://www.zebra.com/manuals.

Notes

• Other command languages are disabled when running Virtual Device-Mi. However,

Set/Get/Do (SGD) commands and file download all operate properly with

Virtual

Device-Mi enabled.

• Virtual Device-Mi fonts can only be used with Virtual Device-Mi commands. They cannot

be used with other languages.

•The Virtual Device-Mi mode application will not respond to CPCL, ZPL, or EPL

commands. Instead, commands will be processed by the

Virtual Device-Mi application.