User guide

About This Document
Who Should Use This Document
10
P1076806-001 Virtual Device-Mi User Guide 01/26/2015
Who Should Use This Document
This manual describes the Virtual Device-Mi language for Zebra mobile and tabletop printers
and should be used by any person who needs to support that language on one of the following
Zebra printers:
For complete printer operation, use this manual in combination with the User Guide for your
printer.
How This Document Is Organized
The User Guide is set up as follows:
Printer Firmware
QLn™ Series V68.19.6Z or later
ZT200™ Series V72.19.6Z or later
ZT400™ Series V75.19.7Z or later
ZD500™ Series V74.19.6Z or later
iMZ™ Series V73.19.6Z or later
Note • The Virtual Device-Mi language is supported only on 203 dpi printers.
Section Description
Introduction on page 11 This section describes the features and functions of a Zebra printer
that is running the Virtual Device-Mi application. The
Virtual Device-Mi application enables Zebra mobile and tabletop
printers to work with many host systems that are using
MICROCOM CORPORATION™ printers. In most cases, no
changes will be required to the host application. This feature can
help customers to make a smooth transition to Zebra printers and
save them the time and expense of having to rewrite their host
software.
Install, Register, and Enable Virtual
Device-Mi on page 13
This section provides you with instructions on how to install and
enable the Virtual Device-Mi application on one or more Zebra
printers.
Commands on page 37 This section provides a listing of commands for use on your Zebra
printer with the Virtual Device-Mi app.
Supported Fonts on page 43 This section provides you with examples of the fonts available on
the Zebra printers with Virtual Device-Mi.
Download the ZDownloader
Application on page 47
Zebra recommends that you use the ZDownloader application to
download a Virtual Device app to your printers. This section
provides you with the instructions for downloading and installing
this application.