User guide

Figure 1-17 : New Connection (PPPOE Connection Setup)
5.6.3 ADSL Modulation
To configure the DSL modulation type, Click setup. Under WAN Setup, select Modem Setup. This will
bring up the modem setup screen. Leave the default value if you are unsure or the DSL/ISP did not
provide this information. For most all cases, this screen should not be modified.
Figure 1-18 : ADSL Modulation (Modem Setup)
5.6.4 Quickstart
PPPoE is also known as RFC 2516. It is a method of encapsulating PPP packets over Ethernet. PPP or
Point-to-Point protocol is a method of establishing a network connection/session between network hosts.
It usually provides a mechanism of authenticating users.