Specifications

50
ｍ
Printing position Processing of digits less than those specified
0,48 Align right Adds spaces to the left
1,49 Align right Adds 0 to the left
2,50 Align left Adds spaces to the right
[Notes] • If n or m out of the defined range, the previously set print mode is not changed.
• If n =０,ｍdoes not have any meaning.
[Default] n = 0, m = 0
[Reference]
GS C 1, GS C 2, GS C, GS c
[Examples]
GS C 1 aL aH bL bH n r
[Name] Select count mode (A)
[Format] ASCII GS C 1 aL aH bL bH n r
Hex 1D 43 31 aL aH bL bH n r
Decimal 29 67 49 aL aH bL bH n r
[Range] 0 ≤ aL ≤ 255
0 ≤ aH ≤ 255
0 ≤ bL ≤ 255
0 ≤ bH ≤ 255
0 ≤ n ≤ 255
0 ≤ r ≤ 255
[Description] Select a count mode for the serial number counter.
• aL, aH bL, bH specify the counter range.
• n indicates the stepping amount when counting up or down.
• r indicates the repetition number when the counter value is fixed.
[Notes] Count-up mode is specified when
[ aL + aH 256] < [ bL + bH 256] , n 0 and r 0.
 Count-down mode is specified when
[ aL + aH 256] > [ bL + bH 256] ,n 0 and r 0.
 Count stop when
[ aL + aH x 256] = [ bL + bH x 256] , n = 0 or r = 0.