Specifications

24
[Reference]
 This command sets the position where data is buffered to the position specified by
ESC T within the printing area defined by ESC W.
 This command switches the settings for the following commands to those for page
mode:
-Set right-side character spacing: ESC SP
-Select line spacing: ESC 2, ESC 3
 Only value settings is possible for the following commands in page mode; these
commands are not executed until switch to standard mode.
-Turn 90° clockwise rotation mode on/off: ESC V
-Turn upside-down printing mode on/off: ESC {
-Set left margin: GS L
-Set printable area width: GS W
 The printer returns to standard mode, after it is reset, or executes ESC @.
FF, CAN, ESC FF, ESC S, ESC T, ESC W, GS $, GS \
ESC M n
[Name]
[Format]
[Range]
[Description]
[Notes]
Select character font
ASCII ESC M n
Hex 1B 4D n
Decimal 27 77 n
n = 0, 1, 2, 3, 48, 49, 50, 51
Selects character fonts.
N Function
0,48 Select standard ASCII font
1,49 Select compressed ASCII font:
2,50 Select user defined character
3,51 Select Chinese font, include:
1) Simplified Chinese（GB2312）
2) Traditional Chinese（BIG5）
3) Japanese (JIS/SJIS/EUC)
4) Korean (KSC5601/EUC)
The printer will print selected Chinese font [simplified Chinese, traditional
Chinese, Japanese (EUC) or Korean (EUC)] according to its configuration
• When Chinese font is selected, Chinese font and western font can be printed
together. The font code in <20>H~<FE>H is identified as Western font
automatically, and those in <A1>H~<FE> are Chinese font.
• When Japanese is selected, the command switches western font to
Japanese.
• After Chinese font is selected, Font A is also enabled automatically.