Operator`s manual

41
:865,866,1252
:Katakana
International Character :U.S.A.
:France
;Germany
:U.K.
:Denmark l
:Italy
:Spain I
:Japan
:Norway
:Denmark ll
:Spain ll
:Latin America
Bar Code Available :UPC-A
:UPC-E
:EAN-8
:EAN-13
:CODE 39
:CODE 93
:ITF
:CODABAR
:CODE128
:PDF417
Explanation of self-test page content:
Boot Firmware Printer BOOTLOADER version
Main Printer monitor program version
H/W Parameters Printer parameter setting
H/W ID Printer ID setting
Flash Memory Size Printer FLASH size
Flash Logos Size Flash size for bitmap downloading
Resolution Printer resolution
Valid Print Width（Max） Maximum print width
Fixed Left Margin Fixed left margin setting
Fixed Right Margin Fixed right margin setting
PrintSpeed（MAX） Print speed
Dark Scale Print darkness
Cutter Enable/ Disable cutter
Paper Roll Width (MAX) Maximum width of paper roll
PRSENTER Enable/Disable PRESENTER
PRSENTER Mode PRESENTER paper out mode
PRESENTER WAIT TIME Time print is presented before retraction
Comm Interface Communication interface setting
Rx Buffer Size Data receiving buffer zone size
Interface Type Interface type
Baud Rate Serial communication baud rate setting
Data Bit Serial communication data bit setting
Stop Bit Serial communication stop bit setting
Parity Serial communication parity bit setting
Handshaking Serial communication data stream mode (handshaking type)
Command CR Enable/Disable CR command
Data Received Error Serial receive error
Interface Type2 The second interface type
Resident Fonts Font setting