Operator`s manual

Appendix A Quick Reference Command Summary
48-466 Operators Manual 75
94 Piezo On/Off:
0 Enable piezo.
1 Disable piezo.
XX 95 Load User Defined Steps for Label to Advance:
XX 96 Load Advance Delay: ^A specifies how many milliseconds to delay repositioning
of the label in tag/tear and peel-and-dispense modes.
97 Tag/Tear Operation:
0 Turns off tag/tear operation.
1 Advance after every label.
2 Advance after copies count.
3 Advance when idle.
98 Peel-and-Dispense Mode: Section 2.1.2.
0 Turn off peel-and-dispense mode.
1 Turn on peel-and dispense mode.
2 (Custom Applicator Mode - peel and dispense with no delay.)
100 Clear User RAM: This command will clear all downloaded fonts, graphics, and
stored label formats. See Section 5.3.8.
101 Send User RAM Available: The printer will send the number of free bytes to the
serial port (IE. >192480<).
102 Allocate XX amount of blocks for PDF Memory: The remaining blocks will be
allocated to user memory.
1 (256K) 1 block
2 (512K) 5 blocks
3 (1024K) 13 blocks
4 (2048K) 29 blocks