Operator`s manual

Printer Commands Chapter 5
48-466 Operators Manual38
^A ^D COMMAND
25 Change SW5: Change software dip switch #5.
12345678
^ABxxxxxxxx
*******.Q Always 0
******.)Q Always 0
*****.))Q Always 0
****.)))Q Always 0
***.))))Q Always 0
**.)))))Q Always 0
*.))))))) Always 0
.)))))))) Always 0
Position:
1-8 Always 0.
26 Change SW6: Change software dip switch #6.
12345678
^ABxxxxxxxx
*******. Not Used
******.) Not Used
*****.)) Not Used
****.))) Not Used
***.)))) Not Used
**.))))) Not Used
*.)))))) Not Used
.))))))) Always 0
Position:
1 Always 0
2 Not Used
3 Not Used
4 Not Used
5 Not Used
6 Not Used
7 Not Used
8 Not Used
XX 36 Adjust Contrast Base: Used to adjust the contrast base point for such things as
high-speed paper and print head wear. This command is stored in the non-volatile
memory and skews the entire contrast window (^D35). This command has a ^A
range of 10 to 200%.