Operator`s manual

Chapter 2 Basic Operation
48-466 Operators Manual 9
2.2 THE STATUS LIGHTS AND SOUNDS
The status lights have different functions depending upon the mode of the printer. The following
table explains the meanings.
Status Light
Color Sound Mode Meaning
Solid Green None All Power is on.
Solid Green Long Error All Memory operation unsuccessful.
Solid Green
3 Short
Beeps
All Memory operation successful.
Solid Red
Continuous
Pulsed
Beep
All
Printer error:
Caused by a paper-out, or hardware failure.
If an unexplained condition persists, contact
your service representative.
Flashing Red
Continuous
Pulsed
Beep
All
Spike or low voltage on the AC line. The unit
will remain in this mode until the condition is
removed and the printer is powered off.
Solid Yellow N/A All Printer is On-Line.
Table 1
2.3 LOADING PAPER
(TBD)
Printer Feed Mechanism
Figure 5
2.4 CLEANING INSTRUCTIONS
(TBD)