Operator`s manual

Loading Graphic Images Chapter 6

))))))))))))))))))))))))))))))))))))))))))))

470 Operators Manual

6.3 GRAPHIC IMAGE COMMAND SUMMARY

The following commands refer to the use of graphic images:

^A ^D Command

XX 71 Clear Single Non-Volatile Graphic Image from Non-Volatile User Memory:

This command will clear a single non-volatile saved graphic file (1-16) and open

the slot for a new graphic.

XX 101 Load Graphic Image into Non-Volatile User Memory: ^A select which volatile

slot to place the image in (1-16).

XX 102 Load Graphic Image into Volatile User Memory: ^A select which volatile slot

to place the image in (1-16).

XX 109 Delete Single Graphic Image from Volatile User Memory: ^A selects which

slot (1-16) to erase.

116 Send Volatile User Memory Available: The printer will send the number of free

bytes to the serial port (i.e. >327680<).

117 Clear Volatile User Memory: ^A selects which sections of memory to clear.

0 Clear all volatile user memory

1 Clear only graphic images in volatile user memory

2 Clear only downloadable fonts in volatile user memory

118 Read Volatile User Memory: The 470 will send the contents of the volatile

(320KB) user memory to the serial port.

0 Send list of graphic images and downloadable fonts in volatile user memory

1 Send list of graphic images in volatile user memory

2 Send list of downloadable fonts in volatile user memory

119 Read Non-Volatile User Memory: The 470 will send the contents of non-

volatile 192KB user memory to the serial port.

0 List format files, graphics images and fonts in non-volatile user memory.

1 List format files in non-volatile user memory

2 List graphic images in non-volatile user memory

3 List downloadable fonts stored in non-volatile user memory