Operator`s manual

Chapter 4 Designing Labels Using LDS

))))))))))))))))))))))))))))))))))))))))))))

470 Operators Manual

4.4.1 A SAMPLE SESSION (HEADER)

This is the label header from the sample label in section 4.3.

4,812,609,,20,48,,,55

4 - 4 fields following the header

812 - Label width (LSX) of 812 (812/203 = 4 inches).

609 - Label length (LSY) of 406 (609/203 = 3 inches).

- The WEB parameter can be defaulted.

20 - A GAP between labels of 20 (20/203 = 0.10 inch).

48 - Label print speed (DPS) of 48 = 3.2 inches per

second (from Table 3)

- No entry for the LCB parameter means default value

of 0, normal stock on backing paper.

- The AGD could be defaulted. This value was

confirmed using the autosize command.

- SPG could be defaulted. This value was confirmed

using the auto-size function.

55 - A carriage return must follow the label header. There

were two parameters left that were not entered into the

header - OFX and OFY. Because they were not entered,

the printer assumes the default values, 0 in their

cases. Likewise, since the AGD and SPG were defaulted,

the carriage return could have followed the DPS.

Note: Defaulted fields must be separated by commas.