Operator`s manual

Appendix D Quick Reference Command Summary

))))))))))))))))))))))))))))))))))))))))))))

470 Operators Manual

105

28 Show Head Size: This function will send the print head dot count to the

communications port. The output is in standard ASCII and will be 640, 768, or

832.

29 Printer Statistics:

0 Print statistics to serial port

1 Print statistics on a label

2 Clear the printed labels variable in the statistics

3 Clear the printed inches variable in the statistics

30 Change Clock: Use the sequence below to set the time and date of the

optional real-time clock:

^D30 (return)

HH:MM:SS (return)

DD/MM/YY/W (return)

31 Show time: The printer will respond by sending the current time to the

communications port. The output is standard ASCII and in the format;

Hours,Min,Sec.

For example: 12:38:59

32 Soft Reset: Restores printer to power-up settings. Also used to set the battery

backed ram fields in memory. Section 5.3.

33 Display Model and Revision Number.

34 Automatic Daylight Savings Time Adjustment:

0 Disable

1 Enable

35 Contrast Window Adjust: A value from 60 to 140 in increments of 1.

XX 36 Adjust Contrast Base: A battery backed ram command. The ^AXX is between

10 and 200%. Section 5.3. This command should only be used to

adjust/calibrate head base contrast differences between printers. Use ^D35 in

normal use.

37 Check Voltages: This command will send the current power supply voltages

and head temperature measurements to the communications port.

38 Epson® Similar Emulation:

1 40 column Epson® similar emulation (2 inch)

2 80 column Epson® similar emulation (4 inch)