Instruction manual

©INCOE® CORPORATION 8/2010
Pg. 32
www.incoe.com
2
M SERIES
INSTRUCTION MANUAL
OPERATION

1) Remove back cover and unscrew the 2 screws
holding the TRIAC BTA40A/700B.
Then you may pull the control card in your direction
in order to remove it from the black 6 pins connector.
DO NOT REMOVE CARD IF TRIAC HAS NOT BEEN
UNSCREWED.
2) Hold control card in hand and remove the 2
connectors as shown. Place new card and replace
with.
 
CARD
1) Remove back cover and unscrew the 2 screws
holding the TRIAC BTA12A/700B.
Then you may pull the control card in your direction
in order to remove it from the black 6 pins connector.
DO NOT REMOVE CARD IF TRIAC HAS NOT BEEN
UNSCREWED.
2) Hold control card in hand and remove the 2
connectors as shown.
Place new card and replace with.
Screw driver
1)
2)
1)
Screw driver
2)