Instruction manual

Pg. 31
www.incoe.com
©INCOE® CORPORATION 8/2010
2
M SERIES
INSTRUCTION MANUAL
OPERATION
2.30 DISPLAY ALARMS
Press the ALARM key to display all alarms as
shown below:
Press left and right arrows on the keypad to display
another control zone.
A: to move to the oldest or to the latest alarm
message 500 messages are stored. Alarm 501
erases alarm 1 automatically, and so on.
B: to sort alarm messages by zone number or date
and time.
C: to delete one or more preselected alarm
messages.
Notice: Alarm messages are sorted by zone number
or date and time.

Press menu MEAS to display actual temperature and
setpoint as a matter of time.
As shown below:
Press menu CURS to position a vertical cursor as
shown below:
Displayed zone
Setpoint value
Actual temperature value
Maximum temperature value
Temperature increase speed
Minimum temperature value
Cursor