Instruction manual

Pg. 25
www.incoe.com
©INCOE® CORPORATION 8/2010
2
M SERIES
INSTRUCTION MANUAL
OPERATION
2.25 CONNECTING DIAGRAM
The aim of this option is to analyze the electric
heaters inside the tool by measuring the current
zone by zone in order to define:
- installed electrical power (in Watts).
- resistance value of the heating element (in Ohms).
- the temperature increase (in Degrees/Minute).
It shows all alarms (thermocouple broken or
reversed, open load ...) in a dated logbook. It also
shows in real time a diagram about the temperature
changes and the setpoint for a selected zone.
2.24 MOLDSCAN OPTION