Instruction manual

©INCOE® CORPORATION 8/2010
Pg. 24
www.incoe.com
2
M SERIES
INSTRUCTION MANUAL
OPERATION
2.22 MODIFICATION OF zONE STATUS
A: To switch on and off one or more zones.
A message OFF is displayed when switched off.
B: To switch from automatic to manual mode and
vice-versa.
C: To switch from 2nd setpoint to 1st setpoint and
vice-versa.
D: To activate the BOOST function to be configured
in the PARAM page. The BOOST function is
stopped after a predefined time or by pushing
the BOOST key a second time. (see page 23 part
E and part 13.2).
2.23 ALARM MANAGEMENT
As soon as an alarm is activated on one or more
zones (for instance deviation low, deviation high or
others…..), the screen below is displayed after one
minute without touching any key:
Important notice : this icon means there is no power
to the heater and that an alarm is currently activated.
A B C D E