Instruction manual

Pg. 1
www.incoe.com
©INCOE® CORPORATION 8/2010
M SERIES
INSTRUCTION MANUAL
TABLE OF CONTENTS
1 INTRODUCTION
1.1 MAIN FUNCTION Pg. 3
1.2 MAIN FEATURES OF VARIOUS CABINET CONFIGURATIONS Pg. 4
1.3 Power Output Pg. 5
1.4 Tolerance on Supply Power Pg. 5
1.5 Maximum Power Consumed Depending on Cabinet Configuration Pg. 5
1.6 Maximum Allowable Current Depending on Cabinet Configuration Pg. 5
1.7 Cabinet Classes Pg. 5
1.8 MAIN FEATURES OF POWER CONTROL CARDS Pg. 6
1.9 Plant Power Supply Pg. 6
1.10 Tolerance on Plant Power Supply Pg. 6
1.11 Maximum Consumed Power Pg. 6
1.12 Nominal Frequency Pg. 6
1.13 MAIN FEATURES OF THERMOCOUPLE INPUT CARD Pg. 6
1.14 Plant Power Supply Pg. 6
1.15 CONNECTION TO PLANT POWER SUPPLY Pg. 6
1.16 INSTALLATION CONDITIONS Pg. 6
1.17 DEFINITION OF APPLICABLE EMC STANDARDS Pg. 6
2 OPERATION
2.1 General Diagram Pg. 7
2.2 Electronic Diagram of 16A Power Control Card Pg. 8
2.3 Electronic Diagram of 5A Power Control Card Pg. 9
2.4 Electric Power Diagram for Cabinet M4U-16.00 Pg. 10
2.5 Electric Diagram for Commands on Cabinet M4U-16.00 Pg. 11
2.6 Safety Conditions Pg. 12
2.7 Thermocouples Pg. 12
2.8 Power Outputs Pg. 13
2.9 Alarms and Setpoint Changes Pg. 13
2.10 Euromap 17 Communication Pg. 13
2.11 OPERATOR INTERFACE Pg. 14
2.12 Start-up Pg. 15
2.13 Temperature Page Pg. 16
2.14 Status Page Pg. 16
2.15 Mode Page Pg. 17
2.16 Explanation of the Various Displayed Pages Pg. 18
2.17 CONFIGURATION OF CONTROL PARAMETERS Pg. 20
2.18 Parameters of Control Zones Pg. 20
2.19 Locking Keyboard Pg. 22
2.20 Zooming on Zones Pg. 22
2.21 File Management Pg. 23
2.22 Modification of Zone Status Pg. 24
2.23 Alarm Management Pg. 24
2.24 MOLD SCAN OPTION Pg. 25