User manual

NANO-GX User Manual
Page 98
 4M
 6M
 8M (D
EFAULT)
 12M
 16M
 Flat Panel Configuration [Press Enter]
Use the Flat Panel Configuration option to open the Flat Panel Configuration menu.
The Flat Panel Configuration options are shown in Section
0.
 Onboard Audio [Enabled]
Use the OnBoard Audio option to enable or disable the onboard codec.

Disabled
The onboard codec is disabled.

Enabled
(D
EFAULT) The onboard codec is detected and enabled.
 Onoard USB1.0/1.1 (OHCI) [Enabled]
Use the Onboard USB1.0/1.1 (OHCI) option to enable or disable the onboard USB1.0/1.1
controller.

Disabled
The onboard controller is disabled.

Enabled
(D
EFAULT) The onboard controller is detected and enabled.
 Onboard USB2.0 (EHCI) [Enabled]
Use the Onboard USB2.0 (EHCI) option to enable or disable the onboard USB2.0
controller.

Disabled
The onboard controller is disabled.

Enabled
(D
EFAULT) The onboard controller is detected and enabled.