User manual

NANO-GX User Manual
Page 81
Figure 4-15: Audio Kit Connection
Step 3: Connect the cable to an IDE device. Connect the two connectors on the other
side of the cable to one or two IDE devices. Make sure that pin 1 on the cable
corresponds to pin 1 on the connectorStep 0:
4.6 External Peripheral Interface Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
 Serial port devices
 USB devices
 VGA monitors
 Parallel port devices
 RJ-45 Ethernet cable connectors
 Mouse and keyboard
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding NANO-GX external peripheral interface connector making
sure the pins are properly aligned.